Struct scrypto_test::prelude::ValidatorFeeChangeRequest
source · pub struct ValidatorFeeChangeRequest {
pub epoch_effective: Epoch,
pub new_fee_factor: Decimal,
}
Fields§
§epoch_effective: Epoch
An epoch number at (or after) which the fee change is effective.
To be specific: when a next epoch N
begins, we perform accounting of emissions due for
previous epoch N-1
- this means that we will use this [new_validator_fee_factor
] only if
epoch_effective <= N-1
, and [ValidatorSubstate.validator_fee_factor
] otherwise.
Note: when requesting a fee decrease, this will be “next epoch”; and when requesting an
increase, this will be set to [ConsensusManagerConfigSubstate.num_fee_increase_delay_epochs
]
epochs away.
new_fee_factor: Decimal
A requested new value of [ConsensusManagerSubstate.validator_fee_factor
].
Trait Implementations§
source§impl Clone for ValidatorFeeChangeRequest
impl Clone for ValidatorFeeChangeRequest
source§fn clone(&self) -> ValidatorFeeChangeRequest
fn clone(&self) -> ValidatorFeeChangeRequest
Returns a copy of the value. Read more
1.0.0 · source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from
source
. Read moresource§impl Debug for ValidatorFeeChangeRequest
impl Debug for ValidatorFeeChangeRequest
source§impl<D> Decode<ScryptoCustomValueKind, D> for ValidatorFeeChangeRequestwhere
D: Decoder<ScryptoCustomValueKind>,
impl<D> Decode<ScryptoCustomValueKind, D> for ValidatorFeeChangeRequestwhere
D: Decoder<ScryptoCustomValueKind>,
source§fn decode_body_with_value_kind(
decoder: &mut D,
value_kind: ValueKind<ScryptoCustomValueKind>
) -> Result<ValidatorFeeChangeRequest, DecodeError>
fn decode_body_with_value_kind( decoder: &mut D, value_kind: ValueKind<ScryptoCustomValueKind> ) -> Result<ValidatorFeeChangeRequest, DecodeError>
Decodes the type from the decoder, which should match a preloaded value kind. Read more
source§impl Describe<ScryptoCustomTypeKind> for ValidatorFeeChangeRequest
impl Describe<ScryptoCustomTypeKind> for ValidatorFeeChangeRequest
source§const TYPE_ID: RustTypeId = _
const TYPE_ID: RustTypeId = _
The
TYPE_ID
should give a unique identifier for its SBOR schema type.
An SBOR schema type capture details about the SBOR payload, how it should be interpreted, validated and displayed. Read moresource§fn type_data() -> TypeData<ScryptoCustomTypeKind, RustTypeId>
fn type_data() -> TypeData<ScryptoCustomTypeKind, RustTypeId>
Returns the local schema for the given type. Read more
source§fn add_all_dependencies(aggregator: &mut TypeAggregator<ScryptoCustomTypeKind>)
fn add_all_dependencies(aggregator: &mut TypeAggregator<ScryptoCustomTypeKind>)
For each type referenced in
get_local_type_data
, we need to ensure that the type and all of its own references
get added to the aggregator. Read moresource§impl<E> Encode<ScryptoCustomValueKind, E> for ValidatorFeeChangeRequestwhere
E: Encoder<ScryptoCustomValueKind>,
impl<E> Encode<ScryptoCustomValueKind, E> for ValidatorFeeChangeRequestwhere
E: Encoder<ScryptoCustomValueKind>,
source§fn encode_value_kind(&self, encoder: &mut E) -> Result<(), EncodeError>
fn encode_value_kind(&self, encoder: &mut E) -> Result<(), EncodeError>
Encodes the SBOR value’s kind to the encoder
source§fn encode_body(&self, encoder: &mut E) -> Result<(), EncodeError>
fn encode_body(&self, encoder: &mut E) -> Result<(), EncodeError>
Encodes the SBOR body of the type to the encoder. Read more
source§impl PartialEq for ValidatorFeeChangeRequest
impl PartialEq for ValidatorFeeChangeRequest
source§fn eq(&self, other: &ValidatorFeeChangeRequest) -> bool
fn eq(&self, other: &ValidatorFeeChangeRequest) -> bool
This method tests for
self
and other
values to be equal, and is used
by ==
.source§impl SborTuple<ScryptoCustomValueKind> for ValidatorFeeChangeRequest
impl SborTuple<ScryptoCustomValueKind> for ValidatorFeeChangeRequest
fn get_length(&self) -> usize
impl Eq for ValidatorFeeChangeRequest
impl StructuralPartialEq for ValidatorFeeChangeRequest
Auto Trait Implementations§
impl RefUnwindSafe for ValidatorFeeChangeRequest
impl Send for ValidatorFeeChangeRequest
impl Sync for ValidatorFeeChangeRequest
impl Unpin for ValidatorFeeChangeRequest
impl UnwindSafe for ValidatorFeeChangeRequest
Blanket Implementations§
§impl<U> As for U
impl<U> As for U
§fn as_<T>(self) -> Twhere
T: CastFrom<U>,
fn as_<T>(self) -> Twhere
T: CastFrom<U>,
Casts
self
to type T
. The semantics of numeric casting with the as
operator are followed, so <T as As>::as_::<U>
can be used in the same way as T as U
for numeric conversions. Read moresource§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
§impl<T> Downcast for Twhere
T: Any,
impl<T> Downcast for Twhere
T: Any,
§fn into_any(self: Box<T>) -> Box<dyn Any>
fn into_any(self: Box<T>) -> Box<dyn Any>
Convert
Box<dyn Trait>
(where Trait: Downcast
) to Box<dyn Any>
. Box<dyn Any>
can
then be further downcast
into Box<ConcreteType>
where ConcreteType
implements Trait
.§fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>
fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>
Convert
Rc<Trait>
(where Trait: Downcast
) to Rc<Any>
. Rc<Any>
can then be
further downcast
into Rc<ConcreteType>
where ConcreteType
implements Trait
.§fn as_any(&self) -> &(dyn Any + 'static)
fn as_any(&self) -> &(dyn Any + 'static)
Convert
&Trait
(where Trait: Downcast
) to &Any
. This is needed since Rust cannot
generate &Any
’s vtable from &Trait
’s.§fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
Convert
&mut Trait
(where Trait: Downcast
) to &Any
. This is needed since Rust cannot
generate &mut Any
’s vtable from &mut Trait
’s.§impl<T> DowncastSync for T
impl<T> DowncastSync for T
source§impl<Q, K> Equivalent<K> for Q
impl<Q, K> Equivalent<K> for Q
source§fn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
Compare self to
key
and return true
if they are equal.§impl<Q, K> Equivalent<K> for Q
impl<Q, K> Equivalent<K> for Q
§fn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
Checks if this value is equivalent to the given key. Read more
source§impl<Q, K> Equivalent<K> for Q
impl<Q, K> Equivalent<K> for Q
source§fn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
Compare self to
key
and return true
if they are equal.§impl<Q, K> Equivalent<K> for Q
impl<Q, K> Equivalent<K> for Q
§fn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
Checks if this value is equivalent to the given key. Read more
§impl<Q, K> Equivalent<K> for Q
impl<Q, K> Equivalent<K> for Q
§fn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
Compare self to
key
and return true
if they are equal.